All our safety inspections comply with Australian Standards:
AS4084-1993 Steel Storage Racking
AS4084-1993: Covers all static racking with the exception of drive in and drive through racking as well as cantilever and mobile racking.
Section 9.2 Inspections. Inspections shall be carried out on a regular basis, and at least once every 12 months to:
- Ensure that safe working loads are adhered to.
- Ensure that the racking installation has not been altered. A copy of the load application and configuration drawings shall be retained for this purpose.
- Ensure the correct application and use of the equipment.
- Examine connectors for deformation or signs of cracking at the welds.
- Examine for any dislocation and deformation of sections and connections for uprights and beams.
- Examine the extent of damage due to impact in the racking installation.
- Examine the out of plumb of the racking.
These Audits usually comprise of a written report with two sections:
- Rack specifications list & load ratings for each rack
- Damage and non-compliance list detailing:
This list is colour coded so that each problem can be categorised into four groups depending on the severity or hazard risk factor of the problem
- Red category – immediate action
- Orange category – do not use until rectified
- Blue category – routine problem
- Green category – recommendation only
On satisfactory completion of repairs a Certificate of Compliance will be issued.
2a: This section can be given to the manufacturer/repairer so that they may quote on the problems that need addressing, alternatively, Racking Audits Australia can quote for these repairs/modifications for you.
2b: If this is the first visit a Rack location (plan view) drawing will also be included. This can also be given to your choice of repairer to aid in the rectification process.